Inovelli Blue Series Zigbee Smart Dimmer and On/Off Switch for LED, Incandescent

Inovelli is known for building unique and functional products combined with beautiful design.  The new VZM31-SN Blue Series Zigbee 2-in-1 Switch continues this tradition.  The VZM31 Zigbee Smart Switch lets you set it up as either a dimmer or an on/off switch during programming.  Use it as an on/off switch for a porch light or closet.  Use it as a dimmer for a bedroom, bathroom, living room, family room, or any other room of the house where you prefer elegant dimmed lighting.

• Zigbee Smart Switch and Dimmer
• Custom LED notifications
• Scene control
• Compatible with SmartThings, Hubitat, Home Assistant, Amazon Echo*

The LED indicator bar on the Inovelli Blue dimmer/switch indcates the switch status and can be adjusted for colour and brightness.  It can also be used as a custom indicator when used with compatibles hubs or software, with duration and animation effects.

The VZM31 can be used to control a scene of devices/lights when used with SmartThings, Hubitat or Home Assistant.  These scenes are controlled by a variety of actions like double or triple taps.

The VZM31 can be used as a single switch/dimmer (single pole) or in a 3 way or multi-way application using either the AUX01 (preferred method), a "dumb switch, or another VZM31.  Unlike most smart switches, a neutral wire connection can be used but it's optional in all but a few cases.

Smart Bulb mode allows the switch to pass power full time to the down stream bulb(s) while also linking to the smart bulb for control.  See Inovelli's instructions and forums for details before purchasing.

Looking for another colour?  You can change colours using an Inovelli Colour Change Kit.

Inovelli VZM31-SN Blue Series Zigbee Switch Dimmer Features:

• Zigbee 3.0 certified
• Dimmer and On/Off switch in one product
• Rated 120V 600W incandescent, 300W LED, 150W CFL
• DOES NOT SUPPORT non-lighting loads including but not limited to fans, fluorescent fixtures, motors
• Dimensions: 1.2" x 2.8" x 1.6" (3 cm x 2.8 x 1.6) (D x H x W)
• cULus approved
• Trim Plate NOT included.  Lutron Claro Gloss White would be a good match
• Neutral Connection NOT required for single pole applications or when used with the AUX-01 auxiliary switch.
• FCC / IC certified

See the wiring diagram and compatibility information here.

View the Digital Manual before purchasing.

VZM31-SN Includes:

• Smart Switch
• Neutral Wire Jumper
• Instructions

* If you don't see your hub/software listed here, please do not purchase this product without ensuring support from the hub/software vendor.  Not all dimming bulbs are created equal so make sure you select a quality dimmable bulb.  Wall Trim Plate not included.   Direct control from Amazon Echo requires Echo with built-in Zigbee.  Voice control via a smart hub is also supported.