Yes No The Macurco CM-6 is a carbon monoxide detector designed to run on 12-24VAC or 12-32 VDC for use in commercial facilities. A built-in LED display quickly shows CO levels. It has a built-in fan control relay for ventilating and maintaining acceptable CO levels, as well as an alarm output relay to tie in to an alert or fire alarm panel.

The CM-6 fan output can be latching or non latching, and selectable to activate within the sensor range, with delay settings of 0, 1, 3, 5, and 10 minutes. Minimum fan run time adjustable to 0, 3, 5, 10, 15 minutes.

The CM-6 can be used standalone or as a transducer for use with a DVP-120 or similar system and is made in USA for high quality and reliability.

Macurco CM-6 Commercial CO Detector Features:

Operates from 12-24VAC or 12-32VDC
Factory Calibrated
Mounts to 4x4 electrical box
5 A SPDT Output for fan
Fan relay activation selectable within sensor range
Fan output may be set for pilot duty, SPDT, latching, non-latching
Fan delay settings: 0, 1, 3, 5, 10 minutes
Fan minimum runtime settings: off, 3, 5, 10 minutes
NO and NC alarm output, relay rated 0.5A, 120V, 60VA
Operating environment: -18°C to 52°C, 0°F to 125° F

Price

$794.95 CAD

Qty Breaks

Quantity Breaks Unavailable for EACH

EACH

Product Information
Documentation

The Macurco CM-6 is a carbon monoxide detector designed to run on 12-24VAC or 12-32 VDC for use in commercial facilities. A built-in LED display quickly shows CO levels. It has a built-in fan control relay for ventilating and maintaining acceptable CO levels, as well as an alarm output relay to tie in to an alert or fire alarm panel.

The CM-6 fan output can be latching or non latching, and selectable to activate within the sensor range, with delay settings of 0, 1, 3, 5, and 10 minutes. Minimum fan run time adjustable to 0, 3, 5, 10, 15 minutes.

The CM-6 can be used standalone or as a transducer for use with a DVP-120 or similar system and is made in USA for high quality and reliability.